slider7138
  • UNIQUE INTELLIGENCE FROM WITHIN THE MOULD

    Redefining efficiency and compliance in Medical Device manufacturing

    READ MORE
  • Mouldflo products - Monitoring, testing & troubleshooting

    READ MORE
  • Testimonials & Cases - Take it from our customers..

    READ MORE
  • Flow Monitoring Solution - Surveillance of your production

    READ MORE
  • The Mouldflo Test-rig - Document, validate and maintain

    READ MORE
welcometomouldflo7389

Meet and exceed the medical device industry’s highest standards

Make the invisible visible
How water flows within moulds defines what comes out of them. Mouldflo technology captures water flow, pressure, and temperature data in real time – giving you the accurate picture of mould performance needed to optimise production and minimise costs.
For any mould and machine
The Mouldflo range of open, vendor-neutral products lets you optimise any mould in any injection machine - and at any stage in the workflow: pre-production, during active cycles, or when needing re-verification.
Data-driven optimisation
Compact, real-time monitoring and analysis gives you the data that drives traceability, consistency and productivity in Medical Device moulding. It’s the proven path to faster cycles, better quality and full compliance.
parallaxa6677

THE MARKET’S MOST ADVANCED SYSTEMS FOR TESTING, ANALYSING AND VALIDATING THE PERFORMANCE OF COOLING AND HEATING CHANNELS IN ANY PLASTICS MOULD AND FOR ANY INJECTION MACHINE

advancedflowmonitoringAndtesting7807

Optimise your medical device moulding — with monitoring and analysis systems from Mouldflo

Mouldflo systems

Flow Monitor
Mounted to moulding machines for real-time, in-cycle monitoring
Test Rig
Verifies new, serviced or moved moulds before they enter production
Cart
Mobile and compact for fast spot-checks anywhere in the production hall
MouldLive
Cloud-based, remote access to every monitored mould – anytime, anywhere
Calibration Unit
Verify flow accuracy – and satisfy ISO 13485 for Medical Device manufacturing
testimonials7867
Eagle Industry, Hungary
We are happy to have implemented the Mouldflo functionalities into our work processes. It’s easy to use the products and it helps a lot to maintain the quality during production.
Eagle Industry, Hungary
Varroc Lighting Systems
Mouldflo helps us start our production faster, making the time it takes to change a mould more efficient by nearly 10 minutes. It saves us important time and it has improved our work flow considerably.
Varroc Lighting Systems
T E Connectivity
Just having the flow monitoring has been a huge troubleshooting advantage, as we have been able to compare flow through the three different molds that we have been sampling. We immediately found that one of the new tools had a blocked circuit and were able to fix it right away.
T E Connectivity
 Aalbers Tool and Mould Inc.
The Mouldflo Test-rig gives us the reports and technical data required to optimise a tool's cooling efficiency.
Aalbers Tool and Mould Inc.
introbox7859

SIX KEY BENEFITS OF OPTIMISATION BASED ON MOULD-MONITORING DATA

Key benefits

cta7889

The neglected challenge in Medical Device moulding

In injection moulding, what you don’t monitor can hurt you. Underperforming internal channels often go unnoticed – leading to poor part quality, higher energy use, extended cycles, incorrect machine settings, even rust and scale buildup inside moulds. Mouldflo’s mission is to make the invisible visible, helping you cut downtime, reduce scrap, and achieve uncompromised quality.

 

Contact us to learn more 

READ MORE
videoandtext7003

Have confidence in your moulds – before committing to production

 

"The Mouldflo Test Rig gives us the reports and technical data required to optimise a tool's cooling efficiency" 

- Aalbers Tool and Mould Inc.

 

The Test Rig is a compact, all-in-one system that lets you test, document, validate and maintain your moulds. Watch the video to learn more, or contact us for more info about its features and benefits. Learn more about how to use the Test Rig in the video and here: 

READ MORE
contactboxes6684
Mouldflo A/S

Headquarters:

Dynamovej 11, 2. tv.
2860 Søborg
Denmark

 

Tel: +45 40 20 77 22

E-mail: info@mouldflo.com

  

CVR: 36459344

VAT: DK36459344

Deliveries

Delivery address:

Generatorvej 8B, Port 1
2860 Søborg
Denmark

 

Tel: +45 20 52 48 84 

E-mail: purchase@mouldflo.com

 

Important note: There is 1,2 meter ramp

- please remember to notify the delivery company

 

 

Support

For technical support:

Please create a ticket via Zoho Helpdesk or

send an email to support@mouldflo.com

 

Please remember to state the relevant 

Order Number and Serial Number